JH Process Equipment, Inc. • 617 Jeffers Circle. Exton, PA 19341 • Business: 610.903.0900 Fax: 610.903.0907

Filters - High Purity FG Cartridges

Pleated Microfiberglass Cartridges offer an economical, absolute rated, filtration solution for both liquids and gases. They offer excellent flow rates and long service life with an exceptional ability to retain both deformable and non-deformable particles. High Purity - FG Cartridges are constructed with absolute rated borosilicate microfiberglass media that offers high dirt-loading capacities. The natural positive charge of the glass fiber also aids in the retention of negatively charged particulates such as bacteria, endotoxin , and a variety of colloidal materials. Efficiency ratings to 99.98% (Beta 5000).

Flow Rate

Typical Applications

  • Membrane
  • Prefiltration
  • Sterile Air
  • Corn Syrup
  • R.O. Prefiltration
  • Wine Clarification
  • Aromatic
  • Hydrocarbons

Construction Material

Filtration Media - FDA Borosilicate Microfiberglass with acrylic binder.
Support Media – Spun-bonded polyester laminated on both upstream and downstream sides.
End Caps Polypropylene
Center Core Fiberglass
Outer Support Cage Polypropylene
O-rings/Gaskets Buna, Viton, EPDM, Silicone, Teflon® Encapsulated Viton
Note: Contact factory for information on hightemperature stainless construction options.

Sanitization/Sterilization

Filtered Hot Water .............80°C for 30 Minutes
Steam Sterilization .....121° for 30 min, multiple cycles
Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: Stainless insert option needed for all cartridges being hot water sanitized or steam sterilized.

Dimensions

Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.75 inches (7.0 cm) nominal

Maximum Recommended Operating Conditions

Change Out ∆ P-35PSI
Temperature 200°F (93°C)
Note: Optional High Temperature Construction available.

FDA listed materials

Manufactured from materials which are listed for food contact applications in title 21 of the U.S. Code of Federal Regulations.

Toxicity

All polypropylene components meet the specifications for bilogical safety per USP Class VI - 121 C for plastics.

Call Us for Dimensions! 610.903.0900 Ext. 14