JH Process Equipment, Inc. • 617 Jeffers Circle. Exton, PA 19341 • Business: 610.903.0900 Fax: 610.903.0907

Filters - High Flow Polysulfone (PS) Membrane Cartridges

Hydrophilic Polysulfone (PS) Membrane for Water and Aqueous Solutions

Features and Benefits

  • Highly Asymmetric Polysulfone Membrane Media
  • Absolute Rated at > 99.9% Efficiency with    Retention Ratings from 0.05 to 0.8 ɥm
  • Superior Flow Rates and Long Service Life
  • High Purity Plypropylene Hardware
  • End Configurations to Fit Most Housings
  • Rinse-up to 18 Megohm with a Minimum Throughput
  • Pre-rinse Option Available
  • Surface Area = 6.1ft² (0.57 m²) per 10" (25.4 cm)

Liquid Flow Specifications

Typical Applications

  • Deionized Water Systems
  • General-Use Water Filtration
  • Liquid Clarification
  • Recirculating Fluids
  • Chemical Filtration

Construction Material

Filtration Media Polysulfone (PS)
Support Media Polypropylene
End Caps Polypropylene
Center Core Polypropylene
Outer Support Cage Polypropylene
O-rings/Gaskets Buna, Viton, EPDM, Silicone, Teflon® Encapsulated Viton

Sanitization/Sterilization

Filtered Hot Water .............80°C for 30 Minutes
Steam Sterilization .....121° for 30 min, multiple cycles
Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: Stainless insert option needed for all cartridges being hot water sanitized or steam sterilized.

Dimensions

Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.75 inches (7.0 cm) nominal

Maximum Recommended Operating Conditions

Change Out ∆ P-35PSI
Temperature 176°F (80°C)

FDA listed materials

Manufactured from materials which are listed for food contact applications in title 21 of the U.S. Code of Federal Regulations.

Toxicity

All polypropylene components meet the specifications for bilogical safety per USP Class VI - 121 C for plastics.

Call Us for Dimensions! 610.903.0900 Ext. 14