JH Process Equipment, Inc. • 617 Jeffers Circle. Exton, PA 19341 • Business: 610.903.0900 Fax: 610.903.0907
Filters - Wound Depth Cartridges
- Available in a wide variety of lengths and
micron ratings from 9.75 to 50 inches and
0.5-400 μm - Medias to fit all applications including:
polypropylene, bleached cotton, FDA bleached
cotton, natural cotton, polyester, nylon,
and glass - Core materials include: polypropylene, 316 &
304 stainless steel, tin, and glass - Performance-enhancing end-configurations
available to fit every process requirement
Recommended Operation Conditions
- Change out DP: 25 psi
- Max DP @ Ambient Temp: 60 psi
- Max temperatures dependent upon materials of construction
Typical Applications
- Chemicals
- Consumer Products
- Food and Beverage
- Oils
- Paints
- Inks
- Petro Chemicals
- Pharmaceutical
- Photographic
- Plating Solutions
- Vegetable Oils
- Water
- Waste Treatment
Dimensions (nominal)
| Outside Diameter | 2.5 inches (6.4 cm) |
| Inside Diameter | 1 inch (2.7 cm) |
| Lengths | 9.75 to 50 inches (24.8 to 125 cm) |
Construction Material
| Filtration Media | See Table |
| End Caps | Polypropylene |
| Core | See Table |
| O-Rings/Gaskets | Silicone, Buna, Polyfoam, EPDM, Viton |
FDA listed materials
Manufactured from materials which are listed for food contact applications in title 21 of the U.S. Code of Federal Regulations.Dimensions (nominal)
Length: 9.75 to 40 inches (24.8 to 102 cm) nominalOutside Diameter: 2.5 inches (6.4 cm)
Inside Diameter: 1 inches (2.6 cm)
Pressure Drop vs. Flow Rate
Call Us for Dimensions! 610.903.0900 Ext. 14