INDUSTRIAL PUMPS: Drum Pumps, IBC Pumps, Hand Operated Pumps
Vats • Reactors • IBC's • Drums • Storage Tanksdrum pumps offer a wide selection to choose from, from water like liquids to food products such as honey and mayonnaise. Most of these chemical pumps are of centrifugal design with high speed motors and small impellers which allow them to fit in tight places. Higher viscosity progressive cavity models allow for a smooth non shearing flow. Pump tubes are available in all metallic alloys and non metallic plastics in lengths up to 10 feet. Motors are offered in all voltages, UL Listed Explosion Proof, 12 & 24 Volt, variable speed and air or nitrogen.
| Click on the Manufacturer for the Product List | |
|---|---|
Finish Thompson |
Flux |
Drum Pumps
EP Series Chemical Pump
Electric
|
Air
|
PF Series Chemical Pump
Electric
|
Air
|
TB Series Chemical Pump
Electric
|
Air
|
TBP Series Chemical Pump
Electric
|
Air
|
TT Series Chemical Pump
Electric
|
Air
|
BT Series Chemical Pump
- Max Flow Range 10 GPM
- Max Head Range 200 FT
- Corrosives and Flammables
HVDP Series Chemical Pump
- Max Flow Range 8.5 GPM
- Max Head Range 300 FT
- High Viscosity, Chemicals, Cosmetics, Foods, Coatings
TM Series Chemical Pump
- Max Flow Range 14 GPM
- Mild Corrosives, Solvents, Flammables
EF Series Chemical Pump
Medium performance, light viscosity sealless drum/barrel pumps for container-to-container transfer of acids, corrosives and chemicals.
FTI EF Drum Series
Pump Motors
F460-1 EX Chemical Pump
RPM: 9,500. WT: 13 lbs. Heavy duty motor suitable for hazardous areas that do not require a UL rating. Built-in overload protection switch. Available in 120v or 230v AC, Max. Visc: 900 cP.
Flux Pump Brochure
F458-1 TEFC Chemical Pump
RPM: 9,500. WT: 13 lbs. Totally enclosed fan-cooled. Heavy duty motor suitable for corrosive environments. Corrosion resistant coating. Splash-proof. Built-in overload protection switch. Available in 120v or 230v AC, Max. Visc: 900cP
Flux Pump Brochure
F410 EX UL Chemical Pump
#E67399. class 1. Grp. C&D. RPM: 9,000, WT: 12.5 lbs. (230v available not UL listed) corrosion resistant coating. Will handle flammable liquids up to 450 cP. 410w. Commutator motor available in 115v. Has built-in overload switch with manual reset for safety to avoid danger of automatic restarting.
Flux Pump Brochure
F458 TEFC Chemical Pump
RPM 8,500. WT: 11 lbs. Totally enclosed fan-cooled.
Suitable for corrosive environments. Corrosion resistant
coating. Splash-proof. Built-in overload protection switch.
Available in 120v or 230v AC, Max. Visc: 800cP
F416 Air Motor
WT: 3.5 lbs. Compressed air motor. Output 450w at operating pressure of 85 PSI. Air consumption 17 CFM. Built-in operating valve may be set for continuous or intermittent operation. Suitable for hazardous duty. Max.Visc: 1200cP. Muffler included.
Flux Pump Brochure
F416-1 Air Motor
Wt: 2 lbs. Compressed air motor with 450w output at operating pressure of 85 PSI. Air consumption 17 CFM. Has connection for exhaust air hose or muffler. This motor is suitable for hazardous duty. Max. Visc: 1200cP. Muffler included.
Flux Pump Brochure
F417
120v CSA listed. RPM: 8,500. WT: 5.5 lbs. Double insulated, splash-proof, commutator motor has built-in overload switch with manual reset for safety to avoid danger of automatic restarting. This motor has downdraft ventilation to stop fumes from entering motor while operating. Available in 120v or 230v AC, input 420w. Max. Visc: 600cP
Flux Pump Brochure
F457 and F457EL
F457: RPM: 9,500. WT: 9 lbs
Heavy duty, splash proof, double insulated motor has built-in
overload switch with manual reset to eliminate accidental restarting.
Available in both 120 and 220 volts. Max.Visc. 900cp.
F457EL: As above, but fitted with RPM controller.