Centrifugal Sealless

Click logo for more info.

Ansimag, Division of Sundyne Corporation

• No mechanical seals or packing to service.
• Total non-metallic wetted parts, 99% compatible with any liquid.
• Patented fully encapsulated two-piece impeller reduces inventory.  One drive magnet can be used with eight different impellers.
• Patented two-piece outer drive allows many motor and horsepower combinations.  Inexpensive hubs to fit motor to 100 HP.
• ANSI, sub-ANSI, self-priming, vertical, solids handling.
• Flows to 1600 GPM and 500’ TDH.
• Close-coupled design eliminates baseplates, grouting, couplings, alignment and oil-filled bearing frames.  Pumps are not damaged when started in reverse.
• Pump exterior has an exclusive epoxy polyester hybrid powder coating offering superior corrosion and impact resistance.
• Call us for on-site hands-on Ansimag demonstration.  Available in PA, DE, MD, NJ and areas of NY only.
• Customer reference upon request.

Finish Thompson Magnetic Drive Pumps

• SP Series self priming models SP-11 & SP-15
• Tank & railcar unloading, sumps, tank containment
• Suction lift up to 25 ft
• Corrosion resistant polypropylene or PVDF/ Kynar
• No mechanical seals to leak and a five year warranty
• Suitable for high specific gravity fluids such as Sulfuric Acid
• Flows to 120 GPM and 90' TDH

DB Series End Suction Models DB-11 & DB-15

• Highest efficiency, five year warranty
• Polypropylene or PVDF/Kynar construction
• NPT/BST or flanged connections
• Max flows 136 GPM & 98 Ft TDH
• Standard NEMA or IEC motors
• Flows to 136 GPM and 98' TDH

Air Operated

Click here for Versamatic Unit of IDEX Corps

• Elima-Matic air valve ensures continuous, reliable pump performance. No lubrication required No freezing No stalling.
• Air valve upgrade conversions for Wildon 1 ¼”, 2” and 3” pumps. Simple easy to service two o-ring design.
• Sizes from ¼’ to 3” Flows to 230 GPM.
• Available in Kynar, Polypropylene, Stainless, sanitary, food grade and Cast Iron.
• Many sizes available with corrosion resistant plastic center sections, bolted and clamped.
• All elastomers available including Gore One-Up long life diaphragms.
• Pulsation dampeners, level controls, leak detectors, filter regulators.

Click logo for more info

• GORE ONE-UP PTFE diaphragms, guaranteed to last longer
• Patented Rib design bonded to reinforced rubber backing
• Available for most air operated pumps
• 3.5 times the service life of standard Teflon diaphragms
• Satisfaction and performance guaranteed
• Ask us about a trial offer

Click logo for more info

• Wildon, Warren Rupp, Graco, Yamada replacement parts
• Diaphragm kits, air chambers, wetted parts, shafts and valves
• Fast delivery, discount pricing, highest quality

Click logo for more info

• Sentry pulsation dampeners and surge suppressors
• Will dampen up to 99% of pulsations
• Protect meters, piping, fittings, gauges and valves
• Provides liquid energy storage
• Non-metallic and all alloys available up to 100 gallons

Click logo for more info

• Air operated pump diaphragm failure can be catastrophic
• Patented SPILL STOP prevents product loss from pump exhaust
• Compatible with all AOD’s, ¼” to 4”
• All pneumatic, shuts off pump and air supply
• Alarm options and automatic switchovers available
• Full range of chemically resistant materials available

Gear & Progressive Cavity

Click logo for more info

ROPER External Gear Pump

• Transferring, mixing, blending, feeding, lubricating, light and viscous liquids.
• Helical gear design for quiet running.
• Heavy duty construction; cast iron, ductile iron, stainless.
• Family of pumps port sizes 3/8" to 4"
• Product range 1-1200 GPM to 1500 PSI to 5000,000 ssu to 500f

ROPER Progressive Cavity

• Slurries, polymers, shear sensitive, solids handling
• 15 Sizes 1" to 10" flange
• Flows to 1000 GPM and 750 PSI
• Up to 10 million CPS viscosity
• Corrosion resistant materials and elastomers
• ROPER pumps can be found in applications for fuel supply, waste treatment, chemical, printing, power generation, food & beverage, candy, asphalt, paper pulp and transportation.

Waste Water Sump Pumps
PIT BULL - Chicago Industrial Pump

• Will handle any combination of abrasives, corrosives and trash.
• Air operated. All controls are above sump level.
• Two check valves. Large passages. Low velocity.
• Begins pumping automatically as it senses liquids.
• Gentle pumping action prevents emulsifying mixed liquids
• All Alloys, Kynar and Fiberglass available.
• Excellent for hazardous areas, oil/water separators, bottom ash, mill scale, lime slurry, packing plant waste, stringy waste, paper stock.
• Flows to 400 GPM and 250' TDH
• Ask us about an on-site demonstration and trial offer.

• The only sealless submersible non metallic pump of its kind.
• Powerful rare earth magnets eliminate the number one problem with submersible pumps ... Mechanical Seal Failure!
• Ideal for acids, caustics, bleaches, solvents.
• Flows to 80 GPM and 45' TDH

We can provide vertical metallic and non metallic bearing and cantilever style pumps for any fluid in any length. Also offered are submersible effluent and solids handling pump stations in simplex and duplex design with control panels, alarms, switches or any instrumentation required. Please contact us to discuss in more detail.

Vertical Sump Pumps

• Polypropylene PVDF, PVC wetted parts
• Cantilever, dry running, bearing design
• Lengths to fit any sump or tank
• Custom designed for each application
• Instrumentation & level controls optional

Submersible Effluent & Sewage

• 1/3 to 30HP de-watering solids, sewage
• Simplex & duplex complete, systems
• Stainless steel, ductile iron, single or double mech, seals
• Level control systems
  

Drum, Tote Tank & Hand Operated Pumps
Click here for Finish Thompson's Drum Pumps

Series TB w/ Electric Motor, Light Viscosity	Series TM w/ Air Motor Medium Viscosity	Drum Pumping Solutions

• Modular design allows unlimited pump and motor combinations.
• Pump tubes 27” 39” 47” to fit drums and totes.
• Custom built to fit tanks up to 10 feet high.
• Will pump any liquids up to 100,000 cps.
• Polypropylene, Kynar, Stainless, Hastalloy and Aluminum tubesets.
• 115/230v 50-60hz  variable speed, Ul CSA listed explosion proof air motors  12V.
• Sanitary, progressive cavity, sealless, drum mixer.
• Accessories: flowmeters, dispensing nozzles, hose, grounding kits.

Click logo for more info
Pacer Hand Pumps

• Double acting piston pump made of Polyester, Ryton or ECTFE.
• Internal parts 316SS, O-Rings: Viton EPDM or Cork.
• Dispenses 1 quart per cycle (back and forth).
• Viscosities up to 2000 cps.
• Includes 8’ discharge hose ¾” NPT discharge.
• Piston, rotary and siphon pumps also available.

Pre-Owned Equipment