JH Process Equipment, Inc. • 617 Jeffers Circle. Exton, PA 19341 • Business: 610.903.0900 Fax: 610.903.0907
Gear & Progressive Cavity Pumps - Roper A Series Pump
Applications
- Pressure lubriction, hydraulic service, fuel supply, fuel additives
- General transfer applications
- Handles a wide range of viscosity
Features
- Cast iron standard construction
- Capable of operating at nominal motor speeds
- Self priming capabilities
- Bi-Rotational
- Pressure up to 300 PSI
- Flows up to 75.6 GPM
Options
- Packing, mechanical seal, or lip seals
- Optional internal relief valve
- Variety of mounting arrangments
- Internal sleeve bearings, lubricated by the pumped fluid, are available in a choice of materials
A Series
| Model |
Theoretical Capacity |
Maximum Speed |
Maximum Flow at Maximum
Speed (0 Discharge Pressure) |
Maximum Pressure |
Port Connection |
| 005 |
.0005 GPR (1.9 CC/REV) |
3600 RPM |
1.8 GPM(.41 M3/HR) |
300 PSI (20 Bar) |
3/8" NPT |
| 01 |
.001 GPR (3.8 CC/REV) |
3600 RPM |
3.6 GPM (.82 M3/HR) |
300 PSI (20 Bar) |
3/8" NPT |
| 02 |
.002 GPR (7.6 CC/REV) |
3600 RPM |
7.2 GPM (1.6 M3/HR) |
300 PSI (20 Bar) |
3/8" NPT |
| 03 |
.003 GPR (11.4 CC/REV) |
3600 RPM |
10.8 GPM (2.5 M3/HR) |
300 PSI (20 Bar) |
3/4" NPT |
| 06 |
.006 GPR (22.7 CC/REV) |
1800 RPM |
10.8 GPM (2.45 M3/HR) |
150 PSI (10 Bar) |
1-1/4" NPT |
| 08 |
.009 GPR (34.1 CC/REV) |
1800 RPM |
16.2 GPM (3.7 M3/HR) |
150 PSI (10 Bar) |
1-1/4" NPT |
| 12 |
.013 GPR (49.2 CC/REV) |
1800 RPM |
23.4 GPM (5.3 M3/HR) |
150 PSI (10 Bar) |
1-1/4" NPT |
| 16 |
.017 GPR (64.4 CC/REV) |
1800 RPM |
30.6 GPM (7.0 M3/HR) |
150 PSI (10 Bar) |
1-1/4" NPT |
| 21 |
.022 GPR (83.3 CC/REV) |
1800 RPM |
39.6 GPM (9.0 M3/HR) |
150 PSI (10 Bar) |
1-1/2" NPT |
| 27 |
.027 GPR (102.2 CC/REV) |
1800 RPM |
48.6 GPM (11.0 M3/HR) |
150 PSI (10 Bar) |
2" NPT |
| 32 |
.033 GPR (124.9 CC/REV) |
1800 RPM |
59.4 GPM (13.5 M3/HR) |
150 PSI (10 Bar) |
2" NPT |
Materials of Construction
| |
Housing |
Gears |
Bearings |
Shaft |
O-Rings |
| STANDARD |
Cast Iron |
Ductile Iron |
Bronze |
Ductile Iron, Steel |
|
| STANDARD |
|
Hardened Steel |
|
Hardened Steel |
|
| OPTIONAL |
Ductile Iron |
|
Iron |
|
|
| OPTIONAL |
|
|
Carbon |
|
|
Key Features
Standard |
Optional |
- Cost effective
- Bi-Directional rotation
- Self Priming
- Flange or foot mounted configurations
- Pressure up to 300 PSI
- Helical gears for quiet operation
|
- Bearing materials
- Internal relief valve
|
| A Series Performance Range |
| Capacity |
0 - 14 m3/hr |
0 - 60 GPM |
| Pressure |
0 -17 Bar |
0 -250 PSI |
| Viscosity |
1 - 55,000 cSt |
28 - 250,000 SSU |
| Temperature |
176° C |
350° F |
Call Us for Dimensions! 610.903.0900 Ext. 14
