Leeton, MO Drum Pumps

Leeton, MO Small Centrifugal Pumps and How They Work

Centrifugal pumps use a rotating impeller to move fluid through a system. This impeller, which is a disk with vanes or blades attached to it, is driven by a motor and the rotation exerts a centrifugal force that causes the fluid to move away from the center of the disk. Due to the difference in pressure caused by this movement, the fluid is drawn into the pump and moved through the system. In addition to transferring fluids, these pumps can be utilized to transport gases.

Leeton, MO Drum Pump Accessories

• AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
• Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
• Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
• Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
• SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
• Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Leeton CENTRIFUGAL PUMPS

• Horizontal or vertical (with IEC motor only) installation
• Heads up to 300 feet (91.5m)
• Sealless design improves reliability with no seal maintenance to perform or seal leaks
• High specific gravity handling – over 1.8
• Minimum flow rate is 1 gpm (.23m3/h)
• Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
• Compact close-coupled design
• High power neodymium magnetic drive system handles high specific gravity fluids
• Maximum working pressure up to 135 PSI (9.3 bar)
• Two stage versions contain two impellers, three stage versions contain three impellers

Practical Applications for Leeton Small Centrifugal Pumps

Small Centrifugal pumps have a wide range of uses across varying industries. Examples of practical applications for small Centrifugal pumps include:

• Small Centrifugal pumps are utilized in medical devices like dialysis machines and infusion pumps.
• Small Centrifugal pumps are used in firefighting applications to move fluids like water and other substances.
• Water treatment: In applications where clean water is required, such as water treatment plants, small Centrifugal pumps are used to move water and other fluids.
• Aquariums: To circulate water in aquariums, small Centrifugal pumps are employed.
• For irrigation in agriculture, small Centrifugal pumps are employed to deliver water and other fluids to plants and crops.
• Plumbing: To move water and other fluids in plumbing systems, small Centrifugal pumps are employed.
• In construction, small Centrifugal pumps are used to move materials like grout, concrete, and other materials.
• HVAC systems: The fluids in heating, ventilation, and air conditioning systems are circulated by small Centrifugal pumps.
• Chemical processing: Small Centrifugal pumps are used to move chemicals in a range of chemical processing applications, such as the creation of personal care products, food processing, and pharmaceutical manufacturing.

Practical Applications for Drum Pumps in Leeton, MO

• Water treatment: In water treatment facilities and other locations where clean water is required, drum pumps are used to move water and other fluids.
• Manufacturing: Fluids like coolants, lubricants, and cleaning agents are transferred using drum pumps in manufacturing settings.
• Agriculture: Drum pumps are used to deliver water and other fluids to plants and crops.
• Drum pumps are used in power generation facilities, such as nuclear power plants and coal-fired power plants, to move fluids.
• Chemical processing: Drum pumps are used to move chemicals in a range of chemical processing applications, such as the manufacture of personal care products, food processing, and pharmaceuticals.
• Drum pumps are used in the mining sector to move fluids like chemicals and water.
• Construction: To transport construction materials like concrete and grout, drum pumps can be used.
• Gasoline production: The oil and gas industry uses drum pumps to transport fluids like oil.