Centrifugal Pumps in North Chevy Chase, MD

North Chevy Chase, MD Small Centrifugal Pumps and How They Work

Centrifugal pumps use a rotating impeller to move fluid through a system. This impeller, which is a disk with vanes or blades attached to it, is driven by a motor and the rotation exerts a centrifugal force that causes the fluid to move away from the center of the disk. Due to the difference in pressure caused by this movement, the fluid is drawn into the pump and moved through the system. In addition to transferring fluids, these pumps can be utilized to transport gases.

North Chevy Chase, MD Drum Pump Accessories

• Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
• AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
• Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
• Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
• Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
• SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, North Chevy Chase CENTRIFUGAL PUMPS

• High specific gravity handling – over 1.8
• Maximum working pressure up to 135 PSI (9.3 bar)
• Sealless design improves reliability with no seal maintenance to perform or seal leaks
• Two stage versions contain two impellers, three stage versions contain three impellers
• Horizontal or vertical (with IEC motor only) installation
• Minimum flow rate is 1 gpm (.23m3/h)
• Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
• Compact close-coupled design
• Heads up to 300 feet (91.5m)
• High power neodymium magnetic drive system handles high specific gravity fluids