Flexible Expansion Loops

Flexicraft provides a complete line of hose assemblies used throughout industries to solves many of the flexible piping solution needs of customers.

SB1 BRAIDED STAINLESS

SB1 is a corrugated stainless steel hose with a stainless steel braid. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 24" diameters. -320F to 1500F.

SI1 INTERLOCKED METAL

SI1 is a stripwound interlocked stainless steel hose. It is relatively lightweight but tough, and is resistant to high temperatures. Applications include bulk material handling, hot fume, engine exhaust, and many others. 1" to 14" diameters. -50F to 1200F.

TC3 ULTRAFLEX

The TC3 Ultra-Flexible Convoluted PTFE Hose for Heavy Duty Applications is made with the thickest seamless PTFE liner in the industry and offers the largest size range which makes it ideal for nearly all demanding high purity and chemical applications. It is available in conductive or nonconductive tubes, and stainless steel or polypropylene covers. 1/2" to 6" diameters. -65F to 450F.

TS5 NEXUS

The TS5 Nexus™  is the Ultimate PTFE Hose, as it combines the best features of smoothbore and convoluted hose into one incredible flexible product; NEXUS™. The smooth I.D. allows for outstanding cleanability, and the convoluted O.D. allows for excellent flexibility. The Nexus™ is then covered in a 316 Stainless or polypropylene braiding. 3/4" to 2" diameters.

PN1 PVC SUCTION

PN1 is a lightweight and economical PVC suction ready hose with a smooth bore. 1" to 12" diameters. 15F to 150F.

RM2 MULTIPURPOSE RUBBER EPDM

RM2 is an economical multipurpose EPDM hose recommended for water and air, as well as many other industrial and construction uses (not suitable for petroleum products) up to 2" diameters. It has excellent weather and abrasion resistance. -40F to 190F.

RS1 RUBBER SANITARY

RS1 is a high quality food transfer hose for suction or discharge of a non-oil edible products. Gray EPDM cover with a white Chlorobutyl tube. Resistant to CIP cleaning solutions and can be steam cleaned. Meets FDA requirements. 3/4" to 4" diameters. -40F to 240F.

RT1 STEAM

RT1 is a quality rubber steam hose with a heat resistant EPDM tube and cover for maximum life. 1/2" to 3" diameters. -20F to 415F.

PH2 PVC CLEAR MATERIAL HANDLING

PH2 is a clear PVC dry material handling hose provides quiet operation and visual confirmation of flow. Food grade, FDA, USDA, and 3-A approved. 1" to 8" diameters. 15F to 150F.

HM1 HYDRAULIC

The Model HM1 is a rubber SAE 100R1AT hydraulic hose for pressure hydraulic oil and other systems. It uses a black Nitrile tube and black Neoprene cover with one wire braid reinforcement. MSHA approved. 3/16" to 1" diameters. -40F to 212F.

ET1 LLDPE POLYETHYLENE TUBING

ET1 is an LLDPE Polyethylene Tubing that is economical and lightweight, and stands up to environmental stress cracking and higher pressures. The chemically inert linear low density polyethylene is also a food grade material. 1/8" to 1-1/2" diameters. -50F to 140F.

VB1 UTILITY BLOWER

VB1 is a lightweight, economical, and durable utility hose is designed for maximum airflow in positive pressure venting applications. It resists UV rays, ozone, and mildew, and can be easily stored as well. 3" to 24" diameters. -20F to 180F.

BB1 BRAIDED BRONZE

BB1 is a corrugated bronze hose with a single bronze braid. It has a high pressure capacity at high temperatures. It is resistant to bursting, cracking, and crushing, while being quite flexible. 1/4" to 3" diameters. -50F to 450F.

TS2 SMOOTHFLEX

The TS2 SmoothFlex™ is a smooth bore PTFE hose with stainless steel braid reinforcement that is designed for long trouble-free service in a wide range of chemical resistant and high purity applications. The hose is available in standard white, and also anti-static conductive black PTFE where electrostatic dissipation is required. Also available in both Nominal (SN) Dash Sizes as well as True Bore (ST) Full ID sizes. SIP & CIP. 1/8" to 1-1/2" diameters. -65°F to 450°F .

TC4 PROFLEX

The TC4 ProFlex™ PFA offers very long lengths up to 1,000 feet, excellent chemical resistance, and flexibility. PFA has the same chemical and temperature resistance as PTFE and much better flex life than FEP. ProFlex industrial grade PFA was designed for customer applications that don't require or need pharmaceutical grade hose. For Pharmacopoeia class VI or semi-conductor applications please request ProFlex "HP". It is available with stainless steel or polypropolyene braiding. 1/2" to 3" diameters. -65F to 450F.

RN1 RUBBER SUCTION

The Model RN1 is a quality rubber suction hose designed for rugged applications, and makes tighter bends without kinking. It is reinforced with textile plies and a helical wire. 1-1/4" to 12" diameters. -40F to 180F.

PN2 CLEAR PVC SUCTION

PN2 is a lightweight and flexible, high quality PVC hose specially designed for suction or transfer applications where visual flow is preferred. It has a smooth bore and an external rigid orange PVC helix. 1-1/2" to 10" diameters. 5F to 150F.

LS1 PLASTIC SUCTION

LS1 is a lightweight, crush resistant and non-kinking plastic suction hose that retains its excellent flexibility even in the cold weather. A smooth bore tube minimizes material buildup and is resistant to a variety of chemicals in sanitary and many other demanding applications. 1-1/2" to 4" diameters. -40F to 140F.

RS4 RUBBER SANITARY

RS4 is a high quality food transfer hose for suction or discharge of a wide variety of oily and nonoily edible products. Gray Nitrile/PVC abrasion resistant cover with a white Nitrile tube that is reinforced with a wire helix. Meets FDA requirements. 3/4" to 4" diameters. -40F to 210F.

RV1 OVER THE PIPE

RV1 hose can slip over piping outer diameters for a sleeve fit. 7/8" to 5-1/2" inner diameters. 0F to 212F.

RH1 RUBBER MATERIAL HANDLING

RH1 is a heavier weight rubber material discharge hose designed to handle a variety of slurries & highly abrasive materials. A thick, FDA natural rubber tube is used for abrasion resistance, with a high grade cover. 1-1/2" to 12" diameters. -20F to 190F.

PT1 REINFORCED CLEAR PVC

PT1 is a clear PVC tubing hose with a polyester yarn braid reinforcment for higher pressures. FDA, USDA, 3A and NSF grade. 3/16" to 2" diameters. 25F to 150F.

TD1 THERMOPLASTIC RUBBER DUCT

TD1 is a tough and light weight thermoplastic rubber hose that is very well suited to most industrial duct and fume jobs, as well as light material handling. 2" to 24" diameters. -60F to 275F.

MD1 ALUMINUM DUCT HOSE

MD1 is a helically corrugated aluminum hose that is light weight, hand bendable, self-supporting and stationary. Standard lengths 5 & 10 feet. 2" to 12". -100 to 400F.

SU1 UNBRAIDED STAINLESS

SU1 is a corrugated stainless steel hose that can be used at lower pressures at high temperatures. For higher pressures, see the braided metal hoses options. 1/4" to 24" diameters. -320F to 1500F.

TC2 MULTIFLEX  | The TC2  MultiFlex™ combines excellent flexibility with a high pressure rating. MultiFlex™ is perfect for demanding high purity and chemical applications. FDA approved materials meet or exceed Pharmacopoeia class VI and 3A standards. Engineered for extended use in hostile environments involving severe chemical, thermal, and mechanical stresses. It is available in conductive or nonconductive tubes, and stainless steel or polypropylene covers. 1/2" to 3" diameters. -65F to 450F.

TR3 FLEXCHEM

The TR3 FlexChem is a versatile, rubber covered FEP-lined transfer hose. This smooth bore FEP hose with its smooth EPDM rubber cover is easy to handle and resists abrasion and chemical attack while it facilitates easy cleanability. FlexChem series hose is available in white FEP or a PTFE conductive black liner where electrostatic dissipation is required. The FEP liner can be factory flared through: flanges; sanitary fittings; male and female cams. 1/2" to 6" diameters. -40F to 350F.

RD1 RUBBER DISCHARGE

RD1 is a quality rubber discharge hose designed for applications where suction is not required. This is a versatile choice for many applications, and it includes a top grade EPDM rubber cover. 1-1/2" to 12" diameters. -40F to 180F.

PD1 PVC DISCHARGE

PD1 is a PVC blue discharge lay-flat hose that resists kinking and twisting. Designed for standard duty applications. It is strong and economical, and rolls up flat for easy storage. 1-1/2" to 16" diameters. 5F to 130F.

RP1 PETROLEUM TRANSFER

RP1 is the industry standard for suction ready in-plant, tank truck and general transfer of gasoline, oil, and refined petroleum products at 150psi pressures. Also available in ready made assemblies. 1-1/4" to 4" diameters. -40F to 180F.

RC2 CHEMICAL EXTRAFLEX

RC2 is an premium quality extra flexible XLPE lined, suction ready chemical hose that uses a lightweight, kink-resistant construction. 1" to 4" diameters. -40F to 250F.

PH1 PVC MATERIAL HANDLING

PH1 is a high quality rubber & PVC blend material handling hose. It provides quiet operation, good bendability, and good abrasion resistance with a smooth bore. It is made for transferring and suction of dry materials, and dissipates static. 1" to 12" diameters. 0F to 150F.

RH2 CONVOLUTED TRANSFER

RH2 is a heavier weight, rubber material handling hose designed to handle a variety of slurries and dry, highly abrasive materials. It uses our split aluminum flanges that quickly bolt together in the field. FDA natural rubber tube. 2" to 14" diameters. -25F to 180F.

PT2 CLEAR PVC TUBING

PT2 is a crystal clear unreinforced PVC tubing with a smooth interior. FDA, USDA, 3A and NSF grade. 1/16" to 2" diameters. 25F to 150F.

FD1 HIGH TEMP. DUCT

FD1 is a top quality rubber duct hose for high temperature air flow and fume removal. A two-ply fiberglass, coated with silicone gives a rating of 500 deg F, and the smooth bore allows for maximum air flow. 3/4" to 12" diameters. -75F to 500F.

RC9 CL2

The RC9  CL2™ hose assemblies are specifically designed for the safe transfer of chlorine. It is ideal for loading/unloading barges, rail cars, tankers and filling cylinders. Services include Chlorine, Bromine, Sodium hypochlorite, and other highly aggressive oxidizers or corrosives. It is light weight, easy to clean, and resists corrosion from any exposure to moisture/humidity which can unintentionally enter systems. RC9 CL2™ hose assemblies are 100% compliant with the Chlorine Institute's Pamphlet 6. 1/2" to 2" diameters. -40F to 225F.

VISIT

617 Jeffers Circle

Exton, PA 19341

CONTACT US

(610) 903.0900

© 2019 |  JH Process