Metallic Sealless & High Temperature Pumps

Teflon Lined & Alloys • Acids • Caustics • Solvents • Hi Temp Centrifugal • Positive Displacement • Tank & Railcar Unloading Self-priming

Mag-Drive and Sealless Pumps are the most efficient chemical pumps available. Teflon lined, total non-metallic liquid contact with no seals or packing to leak. Close coupled design eliminates the baseplate coupling, guard and alignment problems.

CENTRIFUGAL PUMPS

For all pumping problems from the simplest to the hardest. Transfer, unloading, circulation... High effi ciency, long life and low cost maintenance. Hermetically sealed as there are no mechanical seals. Modular construction, quick and simple maintenance.


Flow up to 4000 mc/h
Head up to 1300 m
Pressure from vacuum up to 1500 bar
Temperature from -150°C up to +450°C
No heat exchanger required up to +350°C

GEAR PUMPS

Wide range from small pumps for mechanical seals flushing to big chemical process units. Heavy duty construction for viscosity up to 25000 cst.


Flow from 0,05 to 80 mc/h
Discharge pressure up to 30 bar
Temperature from -100°C up to +200°C

PERIPHERAL REGENERATIVE TURBINE PUMPS

Low to medium fl ows, pulsation free, systems where high pressure is required. Very simple pump for medium and high pressure, used for low fl ow and high head duty where the traditional centrifugal pumps are not suitable. Very often this type of hydraulic can be used instead of a multistage pump. Ideal pump for long distances or high head.


Flow up to 10 mc/h
Head up to 1000 m
Pressure from vacuum up to 1500 bar
Temperature from -150°C up to +450°C
No heat exchanger required up to +350°C

HOLLOW DISC PUMPS

Heavy Duty, selfpriming, reversible pumps. Low speed,ensure reliability and low noise level. No stripping or vortexing problems, high viscosity medium over 10000 cSt.


Flow from 0,5 to 38 mc/h
Discharge pressure up to 8 bar
Temperature from -50°C up to +200°C

VOLUMETRIC SLIDING VANE PUMPS

Pulsation free Dosing, injection and small transfer, no wetted self priming up to 4 m. A very simple cartridge exchange, at low cost, allows increase or decrease the performances if required. The only wearing parts on this type of machine is the internal equipment.


Flow: 1°Range from 50 l/h up to 400 l/h 2°Range from 500 l/h up to 1000 l/h 3°Range from 1500 l/h up to 3000 l/h Discharge pressure up to 48 bar Temperature from -100°C up to +250°C

SIDE CHANNEL PUMPS

From low to medium fl ows. Best choice for truck unloading and natural gas handling.

 

Flow up to 35 mc/h
Delivery Head up to 360 m
Sistem pressure up 50 bar
Temperature from -90°C up to +250°C

Special Pumps

CHN MAG-M

Acc. To API 685 2nd ed.
Flow up to 2500 mc/h
Head up to 220 m
High system pressure
centrifugal pumps

T MAG-M JACKET

Flow up to 10 mc/h
Head up to 500 m
Special construction

T MAG-XPM

Flow up to 12 mc/h
Head up to 164 m
system pressure
up to 1500 bar

T MAG-M

T MAG-M SPECIAL CONSTRUCTION
Flow up to 10 mc/h
Head up to 500 m
INCOLOY® 825, HASTELLOY® C276,
TITANIUM ALLOY

CN MAG-M Special

Special constructions for
cryogenic applications

CN MAG-M

Acc. To API 685 2nd ed.
Special constructions for dirty liquids,
high temperatures and pressure
Flow up to 4000 mc/h
Head up to 220 m
INCOLOY® 825, HASTELLOY® C276,
TITANIUM ALLOY

T MAG-M HT

HT construction
for temperature
up to 660°F/350°C

Options

PT 100 Devices

For temperature monitoring
of rear casing

CN MAG-M
Acc. to API 685

Execution of special arrangement for dirty or clean pumpage
Acc. To API 685

CT MAG-M

Acc. to API 685
Special version with mechanical speed
multiplyer for speed up to 4500 RPM

CN SEAL-M
Acc. to API 610

Execution of special arrangement for dirty or clean pumpage
Acc. To API 610

Dry running protector and
cavitation detector sensor free

For a complete protection
of every units

Metallic Pumps

CN MAG-MS

Acc.to API 685 2nd ed.
Flow up to 300 mc/h
Head up to 700 m
Acc. To API 610

T MAG-M SERIES

Flow up to 9 mc/h
Head up to 90 m

CN MAG-M SERIES

Acc.to DIN EN 22858
CC Version
Flow up to 250 mc/h
Head up to 145 m

V IN LINE SERIES

Flow up to 3 mc/h
Head up to 14 bar

CN SEAL-M SERIES

Acc.to API 610 11th ed.
Flow up to 4000 mc/h
Head up to 220 m

V MODULAR SERIES

Flow up to 2 mc/h
Head up to 48 bar

CT MAG-M SERIES

Flow up to 12 mc/h
Head up to 164 m
NPSH up to 0,5 m

CT MAG-MS

Flow up to 12 mc/h
Head up to 1000 m
NPSH up to 0,5 m

CN MAG-M API SERIES

Acc. to API 685 2nd ed.
Flow up to 4000 mc/h
Head up to 220 m

T ECO MAG-M SERIES

Flow up to 1,5 mc/h
Head up to 85 m

CN MAG-M SERIES

Acc. to DIN EN 22858 BF VERSION
Flow up to 4000 mc/h
Head up to 220 m

MHV MAG-M SERIES

Flow up to 45 mc/h
Head up to 8 bar

CM MAG-M SERIES

Flow up to 35 mc/h
Head up to 36 m

CN MAG-MV SERIES

Centrifugal Vertical in line Mag-Drive pumps
Flow up to 1800 mc/h
Head up to 95 m

CR MAG-M API SERIES

Acc. to API 685 2nd ed.
Flow up to 4000 mc/h
Head up to 220 m
For solid handling capability

CV MAG-M SERIES

Flow up to 3 mc/h
Head up to 12 bar
NPSH up to 0,5 m

CN MAG-M SERIES

Acc.to ANSI B 73.3
Flow up to 160 mc/h
Head up to 150 m

VANEMAG SERIES

Flow up to 3 mc/h
Head up to 14 bar

GS MAG-M SERIES

Volumetric gear Mag-Drive pumps
Flow up to 80 mc/h
Head up to 30 bar

SC MAG-M SERIES

Flow up to 35 mc/h
Head up to 360 m
NPSH up to 0,5 m

CNV MAG-M SERIES

Centrifugal Vertical Mag-Drive pumps
Flow up to 500 mc/h
Head up to 120 m
Length up to 7 m

Non-Metallic Pumps

CL SEAL-M SERIES

Acc.to DIN 22858 CC and BF version
Flow up to 550 mc/h
Head up to 170 m

T MAG-P SERIES

Flow up to 13 mc/h
Head up to 53 m

C MAG-P SERIES

Acc.to DIN EN 22858
Flow up to 140 mc/h
Head up to 44 m

TSP MAG-P SERIES

Flow up to 12 mc/h
Head up to 50 m
Self-Priming up to 5 m

T MAG-MP SERIES

Flow up to 13 mc/h
Head up to 53 m

C MAG-PL SERIES

Acc.to DIN EN 22858
Flow up to 140 mc/h
Head up to 44 m

CSP MAG-P SERIES

Flow up to 70 mc/h
Head up to 32 m
Self-Priming up to 4 m

CMV MAG-P SERIES

Centrifugal Vertical Mag-Drive pumps
Flow up to 30 mc/h
Head up to 44 m
Length up to 0,5 m

CMP ARMORED SERIES

Acc.to DIN EN 22858
Flow up to 75 mc/h
Head up to 60 m

VP SERIES

Flow up to 3 mc/h
Head up to 5 bar

CM MAG-P SERIES

Flow up to 35 mc/h
Head up to 23 m

CV MAG-P SERIES

Centrifugal Vertical Mag-Drive pumps
Flow up to 140 mc/h
Head up to 44 m
Length up to 5 m

VISIT

617 Jeffers Circle

Exton, PA 19341

CONTACT US

(610) 903.0900

© 2019 |  JH Process