Centrifugal Pumps in Monroe County

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Monroe County CENTRIFUGAL PUMPS

• Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
• High power neodymium magnetic drive system handles high specific gravity fluids
• Two stage versions contain two impellers, three stage versions contain three impellers
• High specific gravity handling – over 1.8
• Minimum flow rate is 1 gpm (.23m3/h)
• Maximum working pressure up to 135 PSI (9.3 bar)
• Heads up to 300 feet (91.5m)
• Compact close-coupled design
• Horizontal or vertical (with IEC motor only) installation
• Sealless design improves reliability with no seal maintenance to perform or seal leaks

Monroe County Drum Pump Accessories

• Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
• Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
• SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
• Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
• Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
• AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.

Practical Applications for Drum Pumps in Monroe County

• Agriculture: Drum pumps are used to deliver water and other fluids to plants and crops.
• Drum pumps are used in the mining sector to move fluids like chemicals and water.
• Manufacturing: Fluids like coolants, lubricants, and cleaning agents are transferred using drum pumps in manufacturing settings.
• Drum pumps are used in power generation facilities, such as nuclear power plants and coal-fired power plants, to move fluids.
• Construction: To transport construction materials like concrete and grout, drum pumps can be used.
• Water treatment: In water treatment facilities and other locations where clean water is required, drum pumps are used to move water and other fluids.
• Gasoline production: The oil and gas industry uses drum pumps to transport fluids like oil.
• Chemical processing: Drum pumps are used to move chemicals in a range of chemical processing applications, such as the manufacture of personal care products, food processing, and pharmaceuticals.

Monroe County Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Fluid-handling devices that employ air pressure to transfer fluids include air operated diaphragm chemical pumps. They are available in several designs, including single- and double-diaphragm models, ball valve layouts, and nonmetallic wetted component setups. These pumps are adaptable and reasonably priced. They can tolerate caustic or abrasive fluids, have high flow rates, and can prime themselves.

They can be used even if the liquid levels change because they are self-priming and can run dry without causing damage. Additionally, they require relatively little maintenance and can deliver a constant flow rate. Last but not least, because these pumps are air-operated, they are simple to install and use a small amount of electricity.

Monroe County Small Centrifugal Pumps

Centrifugal pumps' high flow rates and capacity to handle large volumes of fluid are two of their main advantages. Additionally, they have a fairly simple design that is simple to maintain. Applications for Centrifugal pumps include water treatment, irrigation, oil & gas production, and chemical processing. Centrifugal pumps come in a variety of designs, including axial, mixed, and radial flow pumps. Each type has its own distinct set of qualities and is created for particular applications.

Monroe County Drum Pumps

Drum pumps are utilized for a variety of industrial, commercial, and residential purposes that all entail transferring liquids from sizable drums or containers to other places where the liquid is needed. This involves moving liquids like water, oil, gasoline, and a variety of other kinds of chemicals. Drum pumps are useful for filling containers and for use in manufacturing because they can dispense fluids in precise volumes.

Drum pumps are widely used in a variety of sectors, including industrial, agriculture, and mining. Drum pumps are used in chemical processing businesses for things like food processing and pharmaceuticals. Drums are a common container in the water treatment and construction sectors, hence these businesses also employ drum pumps.