Drum Pumps, IBC Pumps, Hand Operated Pumps

Vats • Reactors • IBC's • Drums • Storage Tanks

Drum pumps offer a wide selection to choose from, from water like liquids to food products such as honey and mayonnaise. Most of these chemical pumps are of centrifugal design with high speed motors and small impellers which allow them to fit in tight places. Higher viscosity progressive cavity models allow for a smooth non shearing flow. Pump tubes are available in all metallic alloys and non metallic plastics in lengths up to 10 feet. Motors are offered in all voltages, UL Listed Explosion Proof, 12 & 24 Volt, variable speed and air or nitrogen.

Pump Motors

F460-1 EX Chemical Pump

RPM: 9,500. WT: 13 lbs. Heavy duty motor suitable for hazardous areas that do not require a UL rating. Built-in overload protection switch. Available in 120v or 230v AC, Max. Visc: 900 cP.

 

Flux Pump Brochure

F458 TEFC Chemical Pump

RPM 8,500. WT: 11 lbs. Totally enclosed fan-cooled. Suitable for corrosive environments. Corrosion resistant

coating. Splash-proof. Built-in overload protection switch. Available in 120v or 230v AC, Max. Visc: 800cP

Flux Pump Brochure

F417

120v CSA listed. RPM: 8,500. WT: 5.5 lbs. Double insulated, splash-proof, commutator motor has built-in overload switch with manual reset for safety to avoid danger of automatic restarting. This motor has downdraft ventilation to stop fumes from entering motor while operating. Available in 120v or 230v AC, input 420w. Max. Visc: 600cP

Flux Pump Brochure

VISCOFLUX Mobile

VISCOFLUX mobile is a mobile and thus very flexible variant of the tried and tested VISCOFLUX drum emptying system. VISCOFLUX mobile is ideal for the gentle conveyance of high-viscosity, paste-like and non-free flowing materials, even from conical drums with aseptic bags. Industrial and Pharma Food Cosmetic versions are available – each for various drum diameters.

 

VISCOFLUX Mobile Pump Brochure
 

VISCOFLUX Mobile Pump Video

F458-1 TEFC Chemical Pump

RPM: 9,500. WT: 13 lbs. Totally enclosed fan-cooled. Heavy duty motor suitable for corrosive environments. Corrosion resistant coating. Splash-proof. Built-in overload protection switch. Available in 120v or 230v AC, Max. Visc: 900cP

Flux Pump Brochure

F416 Air Motor

WT: 3.5 lbs. Compressed air motor. Output 450w at operating pressure of 85 PSI. Air consumption 17 CFM. Built-in operating valve may be set for continuous or intermittent operation. Suitable for hazardous duty. Max.Visc: 1200cP. Muffler included.

Flux Pump Brochure

F417 EL

The same specs as the F417 but fitted with a RPM controller

 

Flux Pump Brochure

VISCOFLUX Lite

The drum emptying system VISCOFLUX lite is used to transfer higher-viscosity media which are just capable of flowing, out of ISO drums with lid. The system transports the media gently and continuously. Like the VISCOFLUX and the VISCOFLUX mobile, the VISCOFLUX lite leaves just less than 1 % of the media in the drum (in drums without inliner).

 

VISCOFLUX Lite Pump Brochure


VISCOFLUX Lite Pump Video

F410 EX UL Chemical Pump

#E67399. class 1. Grp. C&D. RPM: 9,000, WT: 12.5 lbs. (230v available not UL listed) corrosion resistant coating. Will handle flammable liquids up to 450 cP. 410w. Commutator motor available in 115v. Has built-in overload switch with manual reset for safety to avoid danger of automatic restarting.

Flux Pump Brochure

F416-1 Air Motor

Wt: 2 lbs. Compressed air motor with 450w output at operating pressure of 85 PSI. Air consumption 17 CFM. Has connection for exhaust air hose or muffler. This motor is suitable for hazardous duty. Max. Visc: 1200cP. Muffler included.

Flux Pump Brochure

F457 and F457EL

F457: RPM: 9,500. WT: 9 lbs
Heavy duty, splash proof, double insulated motor has built-in overload switch with manual reset to eliminate accidental restarting. Available in both 120 and 220 volts. Max.Visc. 900cp. F457EL: As above, but fitted with RPM controller.

Flux Pump Brochure

 

VISIT

617 Jeffers Circle

Exton, PA 19341

CONTACT US

(610) 903.0900

© 2019 |  JH Process