Centrifugal Pumps in Americus, KS

Americus CENTRIFUGAL PUMPS

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Americus CENTRIFUGAL PUMPS

  • Compact close-coupled design
  • High specific gravity handling – over 1.8
  • Sealless design improves reliability with no seal maintenance to perform or seal leaks
  • Maximum working pressure up to 135 PSI (9.3 bar)
  • Minimum flow rate is 1 gpm (.23m3/h)
  • Two stage versions contain two impellers, three stage versions contain three impellers
  • Heads up to 300 feet (91.5m)
  • Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
  • High power neodymium magnetic drive system handles high specific gravity fluids
  • Horizontal or vertical (with IEC motor only) installation
Practical Applications for Drum Pumps in Americus, KS

Practical Applications for Drum Pumps in Americus, KS

  • Agriculture: Drum pumps are used to deliver water and other fluids to plants and crops.
  • Drum pumps are used in the mining sector to move fluids like chemicals and water.
  • Manufacturing: Fluids like coolants, lubricants, and cleaning agents are transferred using drum pumps in manufacturing settings.
  • Drum pumps are used in power generation facilities, such as nuclear power plants and coal-fired power plants, to move fluids.
  • Construction: To transport construction materials like concrete and grout, drum pumps can be used.
  • Gasoline production: The oil and gas industry uses drum pumps to transport fluids like oil.
  • Water treatment: In water treatment facilities and other locations where clean water is required, drum pumps are used to move water and other fluids.
  • Chemical processing: Drum pumps are used to move chemicals in a range of chemical processing applications, such as the manufacture of personal care products, food processing, and pharmaceuticals.
Americus Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Americus Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Fluid-handling devices that employ air pressure to transfer fluids include air operated diaphragm chemical pumps. They are available in several designs, including single- and double-diaphragm models, ball valve layouts, and nonmetallic wetted component setups. These pumps are adaptable and reasonably priced. They can tolerate caustic or abrasive fluids, have high flow rates, and can prime themselves.

They can be used even if the liquid levels change because they are self-priming and can run dry without causing damage. Additionally, they require relatively little maintenance and can deliver a constant flow rate. Last but not least, because these pumps are air-operated, they are simple to install and use a small amount of electricity.

Americus, KS Drum Pump Accessories

  • Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
  • Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
  • AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
  • SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
  • Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
  • Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
Americus, KS Drum Pump Accessories

Americus KS Drum Pumps

Drum pumps are used for a wide range of commercial, industrial, and residential applications which all involve moving liquids from large drums or containers to other locations where the liquid is required. This includes transferring liquids such as water, oil, gasoline, and various other types of chemicals and liquids. Additionally, drum pumps can be used to dispense fluids in specific amounts, making them practical for filling containers and for uses in manufacturing.

Drum Pumps are popular in industries such as mining, agriculture, and manufacturing. Chemical processing industries rely on drum pumps for things like food proccesing and pharmaceuticals. Even water treatment and construction industries use drum pumps as drums are a regular container in these industries.

Americus KS Drum Pumps

Drum Pumps in Americus, KS

For transfering and dispensing fluids.

0 Item | $0.00
View Cart
Call Now Button