Industrial Chemical Pumps in Greeley Hill, CA
Greeley Hill, CA Drum Pump Accessories
- Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction
- SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
- Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
- Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
- Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
- AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Greeley Hill CENTRIFUGAL PUMPS
- Sealless design improves reliability with no seal maintenance to perform or seal leaks
- Compact close-coupled design
- High specific gravity handling – over 1.8
- Two stage versions contain two impellers, three stage versions contain three impellers
- Horizontal or vertical (with IEC motor only) installation
- Heads up to 300 feet (91.5m)
- Minimum flow rate is 1 gpm (.23m3/h)
- High power neodymium magnetic drive system handles high specific gravity fluids
- Maximum working pressure up to 135 PSI (9.3 bar)
- Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
Choosing the Correct Drum Pump in Greeley Hill CA
When selecting the ideal drum pump for a specific use, there are several factors that should be taken into account. These factors include:
- Size and weight: Take into account the size and weight of both the pump and the drum or other container from which you will be transferring the liquid. Verify that the pump can fit inside the drum and is not too heavy to handle.
- Price: Establish your spending limit and select a pump that satisfies your requirements at a cost you are comfortable paying.
- Compatibility with the medium being transferred: Different models of drum pumps are specifically designed to handle different types of liquids. It is crucial to select the pump that is compatible with the type of liquid you need transported, as some liquids or chemicals can be too abrasive or viscous to work with certain models.
- Power source: Choose a pump that will meet the demands of your application and the type of power source you have available.
- Volume and flow rate: Consider both the volume and flow rate of the liquid you need to move. Ensure that the drum pump you select has a flow rate that meets your requirements.
- Safety considerations: Pick a pump that complies with applicable safety regulations and is suitable for the unique dangers prevalent in your application. Make sure the pump is explosion-proof, for instance, if you are transporting explosive liquids.
Greeley Hill Air-Operated Diaphragm Chemical Pump Designs & Their Advantages
Fluid-handling devices that employ air pressure to transfer fluids include air operated diaphragm chemical pumps. They are available in several designs, including single- and double-diaphragm models, ball valve layouts, and nonmetallic wetted component setups. These pumps are adaptable and reasonably priced. They can tolerate caustic or abrasive fluids, have high flow rates, and can prime themselves.
They can be used even if the liquid levels change because they are self-priming and can run dry without causing damage. Additionally, they require relatively little maintenance and can deliver a constant flow rate. Last but not least, because these pumps are air-operated, they are simple to install and use a small amount of electricity.
Air-Operated Diaphragm Chemical Pumps are Durable, Reliable, and Easy to Maintain
These pumps can move a wide range of chemicals, both acidic and alkaline, reliably and with the least amount of maintenance. Because they are powered by air, they can be used in dangerous places because they can't explode and don't have any electrical parts. Air-Operated Diaphragm Chemical Pumps are long-lasting and reliable pieces of equipment that can be used for a long time in harsh conditions.
Not only do these pumps need little maintenance, but they also have a system of air valves that keeps the flow rate and pressure consistent. They work well to move a wide range of chemicals without the need for priming or lubrication. Air Operated Diaphragm Chemical Pumps are very easy to maintain, making them an ideal choice for many chemical applications.
Practical Applications for Greeley Hill Small Centrifugal Pumps
Small Centrifugal pumps have a wide range of uses across varying industries. Examples of practical applications for small Centrifugal pumps include:
- In construction, small Centrifugal pumps are used to move materials like grout, concrete, and other materials.
- Water treatment: In applications where clean water is required, such as water treatment plants, small Centrifugal pumps are used to move water and other fluids.
- Plumbing: To move water and other fluids in plumbing systems, small Centrifugal pumps are employed.
- Aquariums: To circulate water in aquariums, small Centrifugal pumps are employed.
- For irrigation in agriculture, small Centrifugal pumps are employed to deliver water and other fluids to plants and crops.
- Small Centrifugal pumps are utilized in medical devices like dialysis machines and infusion pumps.
- Chemical processing: Small Centrifugal pumps are used to move chemicals in a range of chemical processing applications, such as the creation of personal care products, food processing, and pharmaceutical manufacturing.
- HVAC systems: The fluids in heating, ventilation, and air conditioning systems are circulated by small Centrifugal pumps.
- Small Centrifugal pumps are used in firefighting applications to move fluids like water and other substances.