Kansas Drum Pumps

Kansas Air-Operated Diaphragm Chemical Pump Designs & Their Advantages

Fluid-handling devices that employ air pressure to transfer fluids include air operated diaphragm chemical pumps. They are available in several designs, including single- and double-diaphragm models, ball valve layouts, and nonmetallic wetted component setups. These pumps are adaptable and reasonably priced. They can tolerate caustic or abrasive fluids, have high flow rates, and can prime themselves.

They can be used even if the liquid levels change because they are self-priming and can run dry without causing damage. Additionally, they require relatively little maintenance and can deliver a constant flow rate. Last but not least, because these pumps are air-operated, they are simple to install and use a small amount of electricity.

MSDB SERIES - MAGNETIC DRIVE, SEALLESS, Kansas CENTRIFUGAL PUMPS

• Maximum working pressure up to 135 PSI (9.3 bar)
• Compact close-coupled design
• Sealless design improves reliability with no seal maintenance to perform or seal leaks
• High specific gravity handling – over 1.8
• Horizontal or vertical (with IEC motor only) installation
• Engineered for corrosive fluids with polypropylene/Ryton© or PVDF/Ryton© construction
• Minimum flow rate is 1 gpm (.23m3/h)
• High power neodymium magnetic drive system handles high specific gravity fluids
• Two stage versions contain two impellers, three stage versions contain three impellers
• Heads up to 300 feet (91.5m)

Practical Applications for Drum Pumps in Kansas

• Drum pumps are used in power generation facilities, such as nuclear power plants and coal-fired power plants, to move fluids.
• Drum pumps are used in the mining sector to move fluids like chemicals and water.
• Agriculture: Drum pumps are used to deliver water and other fluids to plants and crops.
• Manufacturing: Fluids like coolants, lubricants, and cleaning agents are transferred using drum pumps in manufacturing settings.
• Gasoline production: The oil and gas industry uses drum pumps to transport fluids like oil.
• Water treatment: In water treatment facilities and other locations where clean water is required, drum pumps are used to move water and other fluids.
• Construction: To transport construction materials like concrete and grout, drum pumps can be used.
• Chemical processing: Drum pumps are used to move chemicals in a range of chemical processing applications, such as the manufacture of personal care products, food processing, and pharmaceuticals.

Kansas Small Centrifugal Pumps

Centrifugal pumps' high flow rates and capacity to handle large volumes of fluid are two of their main advantages. Additionally, they have a fairly simple design that is simple to maintain. Applications for Centrifugal pumps include water treatment, irrigation, oil & gas production, and chemical processing. Centrifugal pumps come in a variety of designs, including axial, mixed, and radial flow pumps. Each type has its own distinct set of qualities and is created for particular applications.

Kansas Drum Pump Accessories

• AODDampener - AODDampener is unique pulsation dampener manufactured from 316L stainless steel with PTFE backed diaphragm, has fully automatic air control and handles a wide variety of applications.
• Liquid Level Control - The FTI Liquid Level Control is a pneumatic/mechanical device that will automatically turn the pump on and off as the liquid level changes
• Filter/Regulator - Compact, integrated design saves space and reduces piping, includes dual scale psi/Bar gage. Filters incoming air to five microns. Regulator adjusts air pressure from 7.3 to 120 psi (.5 to 8.3 bar).
• SPILLSTOP - Fully pneumatic system safely captures leaked product due to diaphragm failure and automatically shuts down failed pumps to eliminate costly product loss and prevent hazardous spills.
• Cycle Counter - The FTI Air Cycle Counter is an electronic device that counts pump cycles by detecting the presence of the valve carrier. The cycle counter can be universally used on any new or existing FTI Air pump with the proper air valve components.
• Pulsation Dampeners - Removes virtually all hydraulic shock while producing a near steady flow of fluid. Protect piping, valves and fittings from destructive pulsations and surges. Available in a wide range of materials of construction